NCERT Class 12 Appendix 2 on Mathematical Modelling works through seven examples, each showing how the five-step framework from Section A.2.3 applies to a different mathematical tool. The first four examples use trigonometry and matrix algebra. This blog explains all four using the exact values and equations from NCERT.

Example 1: Height of an Inaccessible Tower

The problem: Find the height of a tower when you can observe its top but cannot reach its base.

Let AB be the tower and let an observer at point P (eye-level height h above the ground) measure the angle of elevation α to the tower’s top. If the horizontal distance to the tower’s base is l:

H = h + l tan α …(1)

The parameters h, l, and α are measurable with instruments, so this gives a direct solution.

When the base is inaccessible: If l cannot be measured directly, the observer measures the angle of depression β to the tower’s foot. From the right triangle formed:

l = h cot β

Substituting into equation (1) gives H in terms of only the measurable quantities h, α, and β. Step 5 (model revision) is not needed here — exact inputs yield an exact result.

Example 2: Setting Up the Matrix Model (Business Firm)

The problem: A firm produces three products P₁, P₂, P₃ using raw materials R₁, R₂, R₃ and receives orders from clients F₁ and F₂. Model the raw material requirement mathematically.

Matrix A (2×3): rows are clients F₁ and F₂, columns are products P₁, P₂, P₃ — each entry is the units ordered.

Matrix B (3×3): rows are products, columns are raw materials — each entry is the raw material needed per unit of that product.

The matrix product AB produces a 2×3 matrix. Each entry shows the total raw material a given client’s order requires. This is the mathematical model.

Example 3: Testing the Model with Real Numbers

With the specific matrices given in NCERT:

  • A = [[10, 15, 6], [10, 20, 0]]

  • B = [[3, 4, 0], [7, 9, 3], [5, 12, 7]]

AB = [[165, 247, 87], [170, 220, 60]]

The combined order requires 335 units of R₁, 467 units of R₂, and 147 units of R₃. But only 330, 455, and 140 units are available respectively. The current orders cannot be fulfilled — there is a shortfall in all three materials.

Revising the model (Step 5): If clients reduce their orders to:

A₁ = [[9, 12, 6], [10, 20, 0]]

Then A₁B = [[141, 216, 78], [170, 220, 60]], requiring 311 units of R₁, 436 of R₂, and 138 of R₃ — all within the available stock of 330, 455, and 140. The revised plan is feasible.

This is Step 5 of the modelling framework in direct action: the first model revealed infeasibility, a revised assumption (lower client orders) was tested, and the new model confirmed the plan works.

Example 4: Solving for Optimal Production Quantities

The problem: Given the same raw material stock and matrix B, find how many units of each product to produce so that all raw material is used completely.

Setting up the model (Step 2): Let the firm produce x units of P₁, y units of P₂, and z units of P₃. Reading from matrix B, the raw material constraints give:

  • 3x + 7y + 5z = 330 (R₁ fully utilised)

  • 4x + 9y + 12z = 455 (R₂ fully utilised)

  • 3y + 7z = 140 (R₃ fully utilised)

Solving (Step 3): Using elementary row operations on the matrix form of this system:

x = 20, y = 35, z = 5

The firm should produce 20 units of P₁, 35 of P₂, and 5 of P₃.

Interpreting the result (Step 4): NCERT notes an important trade-off. If the manufacturer produces according to this optimal solution, it cannot fully meet the original client orders from Example 3 — client F₁ ordered 6 units of P₃ but only 5 can be produced. The model reveals the conflict rather than hiding it, which is exactly what Step 4 is for.

What Examples 1–4 Teach About Mathematical Modelling

These four examples show that the same five steps apply across different tools: trigonometry in Example 1 and matrix algebra in Examples 2–4. The framework does not prescribe a tool — it guides how you think before selecting one. The matrix examples also show iterative progression: conceptual setup in Example 2, testing with numbers and revealing shortfall in Example 3, and extending to an optimal plan in Example 4.

Exam Tips

Know H = h + l tan α and l = h cot β from Example 1. Be able to explain what A and B represent and what AB gives. Practise the AB and A₁B computations from Example 3. For Example 4, know the system 3x+7y+5z=330, 4x+9y+12z=455, 3y+7z=140 and the solution x=20, y=35, z=5.

Practise Matrix Modelling on ChampionsPrep

ChampionsPrep offers MCQs and long-form practice questions covering AB and A₁B computations, system-of-equations problems based on Example 4, and every aspect of the matrix modelling examples. with PrepCoin packs from ₹59 with instant AI doubt support.

👉 Start practising at app.championsprep.in

Mathematical Modelling with Matrices: NCERT Class 12 Examples 1–4 Fully Solved podcast artwork
Audio LessonClass 12

Mathematical Modelling with Matrices: NCERT Class 12 Examples 1–4 Fully Solved

ChampionsPrep MathematicsEpisode 1427:43

Subscribe in any podcast app:

Frequently Asked Questions

What does matrix AB represent in the NCERT mathematical modelling business firm example? +

Matrix AB gives the total raw material required to fulfil all client orders. If A contains the units ordered (by client and product) and B contains the raw material needed per unit of each product, then each entry of AB shows the raw material consumed for a specific client's full order.

Why does NCERT replace matrix A with A₁ in Example 3? +

The original AB computation shows the total raw material needed exceeds available stock. A₁ represents revised (reduced) orders from the clients, so that A₁B falls within available raw material. This is an application of Step 5 — modifying the model when the initial results are infeasible.

What system of equations is solved in Example 4 and what is the answer? +

The system is 3x+7y+5z=330, 4x+9y+12z=455, and 3y+7z=140. Using elementary row operations, the solution is x=20 (units of P₁), y=35 (units of P₂), and z=5 (units of P₃).

What is the formula for the height of a tower in Example 1 of NCERT Appendix 2? +

The height is H = h + l tan α, where h is the observer's eye height above the ground, l is the horizontal distance to the tower's base, and α is the angle of elevation to the tower's top. When the base is inaccessible, l = h cot β, where β is the angle of depression to the tower's foot.

How does Example 4 differ from Example 3 in NCERT Mathematical Modelling? +

Example 3 computes the raw material needed for specific client orders and reveals a shortfall. Example 4 reverses the question: given fixed raw material stock, how many units of each product should be produced to use it all? This yields the system of linear equations solved to find x=20, y=35, z=5.