The Four Steps of Mathematical Modelling Explained with the Simple Pendulum

Once a real-life problem has been identified, how do mathematicians actually turn it into a solvable equation — and then trust the answer? The NCERT Class 11 Appendix on Mathematical Modelling answers this with a formal four-step process, illustrated using one of the most familiar objects in physics: the simple pendulum. This post walks through each step in detail and shows exactly how the process plays out with real numbers.

Defining Mathematical Modelling

Mathematical modelling is defined as an attempt to study some part, or form, of a real-life problem in mathematical terms. In other words, converting a physical situation into mathematics with some suitable conditions is what modelling means.

There are four broad stages involved in building and testing a mathematical model:

  1. Understanding the problem

  2. Formulation

  3. Finding the solution

  4. Interpretation and validation

Step 1: Understanding the Problem

The first step is to clearly state what needs to be found. For the simple pendulum — a mass called a bob attached to one end of a string whose other end is fixed at a point — everyone knows the motion is periodic, swinging back and forth. What is not immediately known is exactly how the period of oscillation (the time for one complete swing) depends on the pendulum’s physical properties.

This leads to a precise problem statement: How do we find the period of oscillation of a simple pendulum?

Step 2: Formulation

Formulation itself has two parts.

Identifying the Relevant Factors

The first part is figuring out which quantities actually matter. For the pendulum, four possible factors come to mind: the period of oscillation (T), the mass of the bob (m), the effective length of the pendulum (l) — the distance from the point of suspension to the bob’s centre of mass — and the acceleration due to gravity (g), which is treated as constant at a given place.

Simple experiments help decide which of these factors are truly essential. Using two metal balls of different masses on strings of equal length shows no appreciable change in the period with mass — so mass is not an essential parameter. Repeating the experiment with equal-mass balls but different string lengths shows a clear dependence of the period on length — so length is an essential parameter. Testing and eliminating irrelevant factors this way is critical: unnecessary variables make a model needlessly complicated, while dropping essential ones makes it inaccurate.

Mathematical Description

The second part of formulation is finding an actual equation, inequality, or geometric figure connecting the identified parameters. For the pendulum, experiments measuring the period T for different lengths l produce values that, when plotted, trace a curve resembling a parabola. This suggests a relation of the form:

T² = kl

Further analysis shows that the constant k equals 4π²/g, giving the final formulated equation:

T = 2π√(l/g)

This equation is the mathematical formulation of the pendulum problem.

Step 3: Finding the Solution

Formulating an equation rarely hands over the answer directly — it usually still needs to be solved, calculated, or evaluated using a theorem. For the pendulum, “solving” means simply substituting known values of l and g into the formula above.

For instance, the period of oscillation was calculated for two pendulums of different lengths:

Length (l)225 cm275 cm
Period (T)3.04 sec3.36 sec

These calculated values form the mathematical solution — but they are still just predictions until checked against reality.

Step 4: Interpretation and Validation

A mathematical model is only useful if it explains real facts. This final step involves comparing the results predicted by the model with results actually observed through experiments — a process called validation.

For the pendulum, real experiments were conducted on four different pendulums, recording mass, length, and the actual time taken:

Mass (gms)Length (cms)Time (secs)
3852753.371
3852253.056
2302753.352
2302253.042

Comparing the calculated value (3.36 sec for l = 275 cm) with the experimentally measured value (3.371 sec for the same length), the difference — the error — works out to:

error = 3.371 − 3.36 = 0.011

Since this error is small, the model is accepted. If the error had been large, the model would need to be rejected or improved, and the whole cycle repeated with a better formulation. The small remaining error in the pendulum model exists because the model neglects real-world details like the mass of the string and air resistance.

Once a model is accepted, it must be interpreted — restated in plain terms relevant to the original question. For the pendulum: the period is directly proportional to the square root of the length, and inversely proportional to the square root of the acceleration due to gravity.

Why This Cycle Matters

Every mathematical model is a simplified version of reality, built on assumptions and approximations by its very nature. If a model does not give reasonable answers, the process loops back — assumptions are revisited, the equation is reformulated, and the whole cycle of formulation, solution, interpretation, and validation runs again. This loop, moving from assumptions through to a “satisfied” checkpoint, is exactly why mathematical modelling is described as a continuous, self-correcting process rather than a single one-shot calculation.

Keep Learning

Start Practising with ChampionsPrep

Understanding the logic behind formulas like the pendulum equation makes trigonometry and applied maths click faster. Register free on ChampionsPrep for AI-powered practice, mock tests, and detailed step-by-step solutions built for CBSE and Maharashtra Board Class 11–12 Commerce students, with simple pay-as-you-use pricing.

Test Your Knowledge

Q1.What are the four stages of building and testing a mathematical model?
Q2.Which factor is found NOT to be essential for the pendulum’s period?
Q3.What is the formulated equation for the period of a simple pendulum?
Q4.What happens if the error between predicted and observed values is large?
Q5.How is the accepted pendulum model interpreted?
The Four Steps of Mathematical Modelling Explained with the Simple Pendulum (Class 11 Maths) podcast artwork
Audio LessonClass 11

The Four Steps of Mathematical Modelling Explained with the Simple Pendulum (Class 11 Maths)

ChampionsPrep MathematicsEpisode 183:00

Subscribe in any podcast app:

Frequently Asked Questions

What are the four steps of mathematical modelling? +

The four steps are understanding the problem, formulation (identifying relevant factors and finding a mathematical description), finding the solution, and interpretation and validation of the results.

Why is mass not included in the pendulum's period formula? +

Experiments show that changing the mass of the bob while keeping the string length fixed does not appreciably change the period of oscillation, so mass is excluded as a non-essential parameter.

What is the formula for the period of a simple pendulum? +

The period T is given by T = 2π√(l/g), where l is the effective length of the pendulum and g is the acceleration due to gravity.

What is validation in mathematical modelling? +

Validation is the process of comparing results obtained from a mathematical model with real, experimentally observed facts to check whether the model is accurate enough to be accepted.

What happens if a mathematical model does not match real data well? +

If the error between predicted and observed values is too large, the model is rejected or improved by revisiting the assumptions and formulation, and the modelling cycle is repeated.