If you’ve studied both Planning (Chapter 4) and Controlling (Chapter 8) in CBSE Class 12 Business Studies, you may have noticed how often the two functions reference each other. That’s not a coincidence — planning and controlling are deeply interconnected, so much so that the textbook describes them as “inseparable twins of management.” This post breaks down exactly how the two functions depend on and reinforce each other.

Why Are Planning and Controlling Called “Inseparable Twins”?

A system of control presupposes the existence of certain standards. These standards — the benchmarks against which actual performance is measured — are provided by planning. Once a plan becomes operational, controlling steps in to monitor progress, measure results, discover deviations, and initiate corrective measures so that actual events conform to the plan.

This creates a two-way dependency:

  • Planning without controlling is meaningless. If you set goals and targets but never track whether they’re being achieved, the plan serves no practical purpose.

  • Controlling is blind without planning. If standards are never set in advance through planning, managers simply have nothing to control against. There’s no benchmark, no target, no basis for comparison.

In short: no plan means no basis for control, and no control means no way to ensure a plan is actually implemented.

Planning Is Prescriptive, Controlling Is Evaluative

Planning is fundamentally an intellectual process — it involves thinking, articulation, and analysis to discover and prescribe an appropriate course of action for achieving objectives. It seeks consistent, integrated, and well-articulated programmes for the future.

Controlling, on the other hand, checks whether the decisions made during planning have actually been translated into the desired action. It doesn’t prescribe what should happen — it evaluates what did happen against what was supposed to happen.

This distinction is neatly summarised in the textbook: planning is prescriptive, whereas controlling is evaluative.

Is Planning “Looking Ahead” and Controlling “Looking Back”?

It’s often said that planning is looking ahead while controlling is looking back — and this statement is only partially correct.

Plans are indeed prepared for the future and based on forecasts about future conditions, so planning is rightly called a forward-looking function. Controlling, meanwhile, resembles a “postmortem” of past activities — examining what has already happened to identify deviations from standards, which makes it a backward-looking function in that specific sense.

However, it would be a mistake to stop the analysis there. Planning is itself guided by past experiences (making it partly backward-looking too), and the corrective action initiated through the control function is aimed squarely at improving future performance (making controlling partly forward-looking as well).

So the more accurate takeaway is: planning and controlling are both backward-looking and forward-looking functions, just with different primary orientations.

How Planning and Controlling Reinforce Each Other

The two functions don’t just depend on each other — they actively strengthen one another in an ongoing cycle:

  1. Planning based on facts makes controlling easier and more effective. When plans are grounded in realistic data and accurate forecasts, the standards they generate are more meaningful, making it easier to measure and evaluate actual performance against them.

  2. Controlling improves future planning by providing information derived from past experience. Every deviation identified, every cause analysed, and every corrective action taken becomes valuable input for the next planning cycle — helping managers set more realistic goals and anticipate problems before they occur.

Visualising the Cycle

Think of the process as a loop rather than a straight line:

Planning → Sets Standards → Controlling Measures Performance → Identifies Deviations → Feeds Insights Back → Better Planning Next Cycle

This is exactly why the textbook insists controlling should not be seen as the “last” function of management — it’s the function that closes the loop and kicks off the next round of planning.

Quick Recap

Planning and controlling are inseparable: planning provides the standards that controlling measures against, while controlling provides the feedback that improves future planning. Planning is prescriptive and primarily forward-looking; controlling is evaluative and primarily backward-looking — but in truth, both functions have elements of each. Together, they reinforce one another to keep an organisation continuously improving.

With this relationship clear, you’re ready to dive into the actual mechanics of how controlling works step by step — covered next in the five-step controlling process.

Ready to Master Controlling for Your Board Exams?

Practising a handful of theory questions isn’t enough — Class 12 Business Studies exams reward students who can apply concepts to case-based questions. ChampionsPrep gives you AI-powered, pay-per-use practice sessions with PrepCoin packs from ₹59, covering CBSE and Maharashtra State Board Class XI-XII Commerce topics, plus CUET, IPMAT, JIPMAT, NPAT, and SET prep.

👉 Start practising Chapter 8 - Controlling on ChampionsPrep and turn theory into exam-ready answers.

Relationship Between Planning and Controlling Explained podcast artwork
Audio LessonClass 12

Relationship Between Planning and Controlling Explained

ChampionsPrep Business StudiesEpisode 747:38

Subscribe in any podcast app:

Frequently Asked Questions

Why are planning and controlling called inseparable twins of management? +

Because planning provides the standards that serve as the basis for controlling, while controlling monitors whether those plans are actually implemented — neither function can work meaningfully without the other.

What does it mean that planning is prescriptive and controlling is evaluative? +

Planning prescribes the course of action an organisation should take to achieve its objectives, while controlling evaluates whether the decisions made during planning have actually been translated into the desired results.

Is it correct to say planning is forward-looking and controlling is backward-looking? +

This is only partially correct. While planning is primarily forward-looking and controlling is primarily backward-looking, both functions actually contain elements of each — planning is guided by past experience, and controlling aims to improve future performance.

How does controlling improve future planning? +

Controlling provides information derived from past experience — the deviations identified and their causes — which helps managers formulate more realistic and effective plans in the next planning cycle.

What happens if there is no planning before controlling? +

Without planning, there are no predetermined standards to compare actual performance against, meaning managers would have nothing to control — this is why controlling is described as 'blind without planning.'