Controlling isn’t a vague, one-time activity — it’s a systematic process made up of five clearly defined steps. Understanding this sequence is essential for CBSE Class 12 Business Studies Chapter 8, and it also happens to be one of the most frequently asked Long Answer questions in board exams. Let’s walk through each step with practical examples.

Overview: The Five Steps of Controlling

  1. Setting performance standards

  2. Measurement of actual performance

  3. Comparison of actual performance with standards

  4. Analysing deviations

  5. Taking corrective action

Step 1: Setting Performance Standards

The controlling process begins with setting up performance standards — the criteria against which actual performance will be measured. Standards act as benchmarks that the organisation strives to achieve.

Standards can be set in two forms:

  • Quantitative standards — expressed in precise numbers, such as cost to be incurred, revenue to be earned, product units to be produced and sold, or time to be spent performing a task.

  • Qualitative standards — harder to measure numerically, such as improving goodwill or the motivation level of employees.

Wherever possible, managers should try to set standards in precise quantitative terms, since this makes comparison with actual performance far easier. For example, a company might aim to reduce product defects from 10 per 1,000 pieces to just 5 per 1,000 pieces by the end of a quarter. Even when standards are qualitative, an effort must be made to define them in a way that makes measurement easier — for instance, a fast-food chain might measure “customer satisfaction” through the time taken to seat a customer, place an order, and receive it.

Importantly, standards should stay flexible. Changes in the internal or external business environment may require standards to be revised so they remain realistic.

Step 2: Measurement of Actual Performance

Once standards are set, the next step is measuring what actually happened. Performance should be measured in an objective and reliable manner, and — wherever possible — in the same units as the standards, since this makes comparison simpler.

Several techniques help with measurement:

  • Personal observation

  • Sample checking — in large organisations, it’s neither economical nor practical to check every unit, so pieces are checked at random for quality.

  • Performance reports — an employee’s performance may require a report from their superior, while a company’s overall performance might involve calculating ratios like gross profit ratio or return on investment.

While measurement is generally believed to happen after a task is completed, wherever possible it should be done during the performance itself. In an assembling task, for instance, each part should ideally be checked before it’s assembled, rather than waiting for the final product.

Step 3: Comparison of Actual Performance with Standards

This step involves directly comparing what actually happened against the standard that was set. This comparison reveals the deviation — the gap between actual and desired results.

Comparison becomes significantly easier when standards were set in quantitative terms in Step 1. For example, if a worker’s standard output for the week is a known number of units, comparing their actual output against that figure is straightforward.

Step 4: Analysing Deviations

Some deviation from standards is expected in virtually every activity — perfection is rare. The real skill lies in determining the acceptable range of deviation and prioritising which deviations genuinely need attention.

Two principles guide this step:

  • Critical Point Control — focusing attention on Key Result Areas (KRAs) critical to organisational success, since problems here cause the most damage. A 5% rise in labour cost, for instance, may be far more troubling than a 15% rise in postal charges.

  • Management by Exception — the belief that trying to control everything results in controlling nothing. Only significant deviations crossing the permissible limit should be flagged to management; minor ones are handled by subordinates.

After identifying which deviations need attention, managers must dig into their causes — which might include unrealistic standards, a defective process, inadequate resources, structural drawbacks, organisational constraints, or external environmental factors.

Step 5: Taking Corrective Action

The final step is acting on what was found. If deviations fall within an acceptable range, no corrective action is needed. But if they exceed that range, especially in important areas, immediate attention is required so the problem doesn’t recur.

Corrective action can take different forms:

  • If a production target isn’t met, corrective action might involve training employees.

  • If an important project is running behind schedule, it might involve assigning additional workers and equipment, along with permission for overtime work.

  • If the deviation simply cannot be corrected through managerial action, the standards themselves may need to be revised to stay realistic.

Quick Recap

The controlling process flows through five connected steps: setting standards, measuring actual performance, comparing the two, analysing deviations (using critical point control and management by exception), and taking corrective action. Each step feeds the next, and the final step often loops back into revised planning — reinforcing why controlling and planning are closely linked.

Next in this cluster, we look closer at critical point control and management by exception — two principles that make the analysis step far more efficient.

Ready to Master Controlling for Your Board Exams?

Practising a handful of theory questions isn’t enough — Class 12 Business Studies exams reward students who can apply concepts to case-based questions. ChampionsPrep gives you AI-powered, pay-per-use practice sessions with PrepCoin packs from ₹59, covering CBSE and Maharashtra State Board Class XI-XII Commerce topics, plus CUET, IPMAT, JIPMAT, NPAT, and SET prep.

👉 Start practising Chapter 8 - Controlling on ChampionsPrep and turn theory into exam-ready answers.

The 5-Step Controlling Process Explained with Examples podcast artwork
Audio LessonClass 12

The 5-Step Controlling Process Explained with Examples

ChampionsPrep Business StudiesEpisode 766:31

Subscribe in any podcast app:

Frequently Asked Questions

What are the five steps in the controlling process? +

The five steps are: setting performance standards, measurement of actual performance, comparison of actual performance with standards, analysing deviations, and taking corrective action.

What is the difference between quantitative and qualitative standards? +

Quantitative standards are expressed in precise numbers, such as cost, revenue, or units produced. Qualitative standards, like employee motivation or goodwill, are harder to measure numerically but should still be defined to make measurement easier.

What techniques are used to measure actual performance? +

Common techniques include personal observation, sample checking (checking random pieces for quality in large organisations), and performance reports, including ratio calculations like gross profit ratio or return on investment.

When should measurement of performance ideally take place? +

While measurement is often done after a task is completed, wherever possible it should be done during the performance itself, so problems can be caught and corrected early.

What happens if a deviation cannot be corrected through managerial action? +

In such cases, the standards themselves may have to be revised to remain realistic, since forcing performance to match an unachievable standard would not solve the underlying problem.