One of the most exam-friendly topics in CBSE Class 11 Maths Chapter 4 is the cyclic pattern followed by powers of the imaginary unit i. Once you understand this pattern, you can simplify expressions like i⁴⁹ or i⁻³⁵ in seconds. This post also covers a subtle but important rule about square roots of negative numbers — one that trips up even careful students if applied carelessly.

The Cyclic Pattern of Powers of i

Recall that i² = −1. Using this single fact, every higher power of i can be worked out:

  • i¹ = i

  • i² = −1

  • i³ = i² · i = (−1) · i = −i

  • i⁴ = (i²)² = (−1)² = 1

  • i⁵ = i⁴ · i = 1 · i = i

  • i⁶ = (i²)³ = (−1)³ = −1

Notice that the pattern i, −1, −i, 1 repeats every four powers. This means powers of i cycle with a period of 4, which is the key to simplifying any power quickly.

The General i^(4k) Formula

For any integer k, the powers of i follow this rule:

  • i⁴ᵏ = 1

  • i⁴ᵏ⁺¹ = i

  • i⁴ᵏ⁺² = −1

  • i⁴ᵏ⁺³ = −i

To simplify any power iⁿ, divide n by 4 and look only at the remainder. The remainder (0, 1, 2, or 3) tells you exactly which of the four values above applies.

Example: Simplify i⁴⁹.

Divide 49 by 4: 49 = 4(12) + 1, so the remainder is 1. Therefore i⁴⁹ = i¹ = i.

Negative Powers of i

Negative powers of i can be handled using the reciprocal relationship, since i⁻¹ = 1/i = i/i² = i/(−1) = −i. This gives:

  • i⁻¹ = −i

  • i⁻² = −1

  • i⁻³ = i

  • i⁻⁴ = 1

Solved Example

Example: Express i⁻³⁵ in the form a + ib.

Solution:

i⁻³⁵ = 1/i³⁵ = 1/(i²)¹⁷ · i = 1/[(−1)¹⁷ · i] = 1/(−i) = 1/(−i) × i/i = i/(−i²) = i/1 = i

So i⁻³⁵ = 0 + i(1).

What If the Power of i Changes?

This starts at i⁴⁹ from the example above. Move n one step at a time and watch the answer repeat i, −1, −i, 1. Slide below zero to reach negative powers like i⁻³⁵.

Complex Number Algebra

z = a + ib 0 + 1i
Modulus |z| 1
Conjugate z̄ 0 - 1i
i^n Exponent n 49
i^n Result i

Argand Plane

Re Im z z̄
Syllabus Checkpoints & Exam Watch-Outs
  • Divide n by 4 and use only the remainder. For a negative power, keep the remainder between 0 and 3: −35 = 4(−9) + 1, so the remainder is 1 and i⁻³⁵ = i.

The Square Roots of a Negative Real Number

We already know i² = −1 and (−i)² = i² = −1. This means both i and −i are square roots of −1. However, by convention, the symbol √−1 always refers to i alone, not −i. This convention exists so that √ continues to represent a single, well-defined value rather than two possible answers.

More generally, if a is a positive real number, then:

√(−a) = √a × √(−1) = √a · i

Example: The square roots of −3 are √3·i and −√3·i, since (√3·i)² = 3 · i² = 3(−1) = −3, and similarly for −√3·i. However, the symbol √−3 specifically means √3·i, not −√3·i.

The Critical Rule: √a × √b = √(ab) Does NOT Always Hold

For positive real numbers a and b, you already know that √a × √b = √(ab). This rule also holds true when exactly one of a, b is negative and the other is positive. But it breaks down completely when both a and b are negative.

Why the Rule Fails for Two Negative Numbers

Consider what happens if we wrongly assume √a × √b = √(ab) applies even when both a and b are negative:

i² = √(−1) × √(−1) = √[(−1)(−1)] = √1 = 1

But this is a direct contradiction, since we know i² = −1, not 1! This proves that √a × √b ≠ √(ab) whenever both a and b are negative real numbers.

The Correct Approach

Whenever you’re dealing with square roots of negative numbers, always convert each one to the i-form first, before multiplying:

√(−a) × √(−b) = (√a · i) × (√b · i) = √a · √b · i² = −√(ab)

This is the safe, error-proof method — always simplify √(−a) to √a·i as a first step, and only then perform any further multiplication.

Common Mistakes Students Make

  1. Multiplying two negative square roots directly, e.g., writing √(−4) × √(−9) = √36 = 6, when the correct answer is √4·i × √9·i = 2i × 3i = 6i² = −6.

  2. Forgetting the remainder trick for powers of i. Always divide the exponent by 4 and use only the remainder — don’t try to compute i raised to a large power directly.

  3. Confusing √−1 with ±i. By strict convention, √−1 means i only, even though both i and −i satisfy x² = −1.

Practise Powers of i with ChampionsPrep

Powers of i and square-root simplification questions are exam favourites because they are quick to test and easy to get wrong under time pressure. ChampionsPrep gives you unlimited chapter-wise practice for CBSE Class 11 Maths, mapped precisely to the NCERT syllabus. Registration is free, and it’s pay-as-you-use after that — no lock-in plans. Register free at app.championsprep.in and start practising now.

Powers of i and Square Roots of Negative Numbers Explained podcast artwork
Audio LessonClass 11

Powers of i and Square Roots of Negative Numbers Explained

ChampionsPrep MathematicsEpisode 1104:13

Subscribe in any podcast app:

Frequently Asked Questions

What is the cyclic pattern of powers of i? +

Powers of i repeat every 4 steps in the pattern i, −1, −i, 1, captured by the rule i to the power 4k equals 1, 4k+1 equals i, 4k+2 equals −1, and 4k+3 equals −i.

How do you simplify a large power of i, like i to the power 49? +

Divide the exponent by 4 and use only the remainder. Since 49 divided by 4 leaves remainder 1, i to the power 49 equals i.

What does the symbol square root of −1 represent? +

By convention, the square root of −1 represents i only, even though both i and −i are technically square roots of −1.

Does square root of a times square root of b always equal square root of ab for complex numbers? +

No. This rule holds when a and b are both positive, or when one is positive and one is negative, but it fails when both a and b are negative real numbers.

What is the correct way to find the square root of a negative number like −5? +

Write the square root of −5 as the square root of 5 multiplied by i, always converting to i-form first before performing any further operations.